Understanding Wall-Upright System

1. Select Height

8'0"H

8'0"H + 2'0"H Ext.

8'0"H + 3'0"H Ext.

8'0"H + 4'0"H Ext.

Custom heights are not available. Use Extensions to achieve the height required.

Basics Collection Wall-Uprights mount directly to the wall and sit flush against the wall surface. Wall-Uprights have no footing that level to the floor and are mounted 6" above the finished floor.

2. Select Module Size

25"W

50"W

3. Determine how many Modules will fit on the wall space available

For 25"W Modules
(Wall Length–5)/24

For 50"W Modules
(Wall Length–5)/48.5

Wall length is measured
in inches.

4. Select from Additional Components

Back Panels and Fins are not available for Basics Collection Wall-Uprights.

5. Accessories*

This collection is compatible with Front-Mount and Rail Accessories. Add Sign Holders to finish telling your story.
*Basics Collection Wall-Uprights do not accommodate Post Accessories.
*24"W Accessories are only compatible with 25"W Wall Modules.
*48"W Accessories are only compatible with 50"W Wall Modules.

6. Select from Additional Components

Create even more interest and break up long runs of wall with Basics Collection Focal Panels, Edge Collection Showcases, or Classic Collection Wall-Mounted Cubbies

Helpful Application Tips: Create long runs by determining how many modules will fit in your space. Combine with Classic or Edge Collection single Posts to break up a long run of wall or fit in small areas where full modules won't work. To create the look of a finished corner on two intersecting walls, allow a distance of 18" from either side of the corner. The depth of the accessories will complete the corner.

Installation Notes: Fully detailed installation instructions are included for your specific Wall-Upright configuration when your order ships. Uprights mount to most wall substrates including drywall, brick, and concrete. Proper anchoring hardware is required (not included). Consult your general contractor to recommend appropriate anchoring hardware based on the application and wall substrate. Uprights require (1) anchor every 12" O.C. along the vertical height of the Upright.