Understanding Freestanding Wall System

1. Select Height

7'1"H

9'7"H

Only certain Freestanding Fixtures are available in a 7'1"H.

2. Select Panel Size

25"W Only

3. Select Finial

Endcap

Ring

Flare

Angle

Finials are decorative endcaps for tubular frames.

4. Select Footing Type

Adjustable Levelers Only
Footing Spec. Code: F

Freestanding Wall is not available with Casters.

5. Select Panel Type

Panel Type	Wire Grid	Melamine	Laminate	Perforated Metal	Double Perforated	Oblong Perforated	Expanded Metal	Frosted Acrylic	Specialty Acrylic	Steel X-Brace Cabes
Spec Code	G¹	J²	L²	P¹	Q¹	B¹	E¹	A	H³	W
Available

¹Powdercoat finish required.
²Material finish required.
³Material prices vary greatly. Price based on specification and quantity.

6. Determine how many Freestanding Wall Panels will fit

For 25"W Modules
(Wall Length–5)/26.75

Wall length is measured in inches.

7. Determine how many Support Fins are required for your application

Support Fins are a necessary component of Classic Freestanding Wall construction. They must be located every 4 to 6 feet (2 to 3 Panels). An Opto designer will help determine fin support requirements based on your application.

8. Select Accessories*

This wall system is compatible with all 24"W Front-Mount and Rail Accessories. Add signage to finish telling your story. *48"W Options Collection® Accessories are not compatible with Classic Collection Freestanding Wall.

A guide to understanding Classic Collection fixture numbers

To specify: Create or modify the given part numbers based on the panel type and footing desired for each fixture. The format is as follows:

Helpful Information: Classic Collection Freestanding Wall Panels are great for straight or curved walls, department divisions, and window displays. Freestanding Walls must be against straight or curved structural walls. When being used for departmental division and window display, secondary support fins are required. An Opto designer will help determine fin support requirements based on your application.

Installation Notes: Classic Collection Freestanding Panels come fully assembled. Use Parallel Connectors (required and included with your order) to link panels together. Then, using Parallel Connectors, attach Support Fins per the drawing provided by the Opto design team. Use the adjustable footing to level the assembled fixture to the floor. Classic Collection Freestanding Wall is intended for single-sided merchandising, but can be specified for double-sided merchandising with proper fin support. Only place merchandise on the panel side supported by fins.