1. Determine Configuration
 |
 |
 |
 |
Straight
A |
L-Shaped
B |
U-Shaped
C |
Island
D |
2. Choose from Counter Modules to create desired configuration
Modules can be set side-by-side to create several configurations.
 |
 |
 |
 |
 |
 |
| 24"W |
30"W |
36"W |
48"W |
72"W |
96"W |
 |
 |
Angled Corner
Counter |
Curved Corner
Counter |
3. For each Module, Select Height
| 2'8"H |
2'11"H |
2'11"H is the typical height for counters. |
*The Americans with Disabilities Act (ADA) is a United States Federal regulation focusing on accessibility in public places. There are several sections of this act that directly affect retail establishments. Opto International, Inc. makes every effort to be in compliance with the ADA; however, it is possible to design a counter that is not in compliance. Please be sure to check with your retail contractor or visit ada.gov for more information. In addition to the ADA, your state or local government may impose additional (and more strict) accessibility requirements for retail counters. Check with your local government to make sure your Opto counter configuration is in compliance.
4. Determine Ledge Size and Location
Based on the desired counter configuration, ledges may be specified. Ledges add an additional 5" of height, provide a writing surface, and create appropriate separation between the sales associate and shopper.
 |
|
| 24"W |
30"W |
36"W |
48"W |
72"W |
96"W is not available. |
5. Select Additional Components for the Back of Counters
Optional Components are available to meet service requirements. Choose from the following:
| Shelves |
Full Doors
(24"W, 30"W, 36"W) |
¾ Doors
(24"W, 30"W, 36"W) |
Drawer
(24"W, 30"W, 36"W) |
| |
|
Must use drawer within spec. ¾ doors. |
|