Freestanding Wall Units: Fixture Finder: OPTO International, Inc.

Important Notes About Freestanding Walls

Freestanding Walls must be properly supported.

Many OPTO Wall Systems must be attached to a wall.

		Home \| About Us \| Events \| Technical Info \| Design Service \| Portfolio \| Quick Ship \| Fixture Finder Request a Catalog \| Send OPTO an Email \| Request Design Service


		Gondola Units \| 2/3/4-Way Units \| Feature Units \| Tables/Cubby Units \| Mounted Wall Units Freestanding Wall Units \| Cash Wraps / Retail Counters \| Graphic Displays \| Accessories

2-Module (4-2) Freestanding Wall

The OPTO Freestanding Wall system is the perfect solution for temporary spaces or for applications where wall mounting is undesirable. Panels are available in 7'-1", 9'-7", and 11'-0"H configurations.

You can accessorize your Freestanding Wall like any other Options Collection unit with OPTO's full line of accessories, giving you complete flexibility in merchandising. (See Important Notes.)

Freestanding Wall units are stationary once built and cannot be placed on casters.

Please see Important Notes about Freestanding Walls at the bottom of this page.

Freestanding Wall Units:

A	3-Module (2-2-2) Freestanding Wall	3-Module (2-2-2) Freestanding Wall	2-Module (4-2) Freestanding Wall	2-Module (2-2) Freestanding Wall

B	3-Module (2-2-2) Freestanding Wall	3-Module (2-2-2) Freestanding Wall	5-Module (2-2-2-2-2) Freestanding Wall	3-Module (2-2-2) Freestanding Wall

C	Curve Style 3-Module Gondola	Curve Style 2-Module Gondola	Curve Style 3-Module Gondola	3-Module (2-4-2) Freestanding Wall


		+ Return to Top

Options Collection^® is a registered trademark of OPTO International, Inc. Site content ©2009 OPTO International, Inc.
847-541-OPTO • Fax 847-541-8160 • sales@optosystem.com
Request a Catalog | Send OPTO an Email | Request Design Service

Important Notes About Freestanding Walls

Freestanding Walls must be properly supported.
OPTO Freestanding Wall Systems are designed to allow greater flexibility in retailing, but it's important to understand the physics of such a feat.
All wall systems, freestanding or mounted, must be properly supported to avoid fixture failures. With a freestanding wall, this can be accomplished in several ways, including support fins (both front and rear locations, depending on fixture load), installing the freestanding wall in a curve, or with perpendicular sections.

When choosing accessories for the Freestanding Wall Panel system, you must specify the same width accessory as your panel. 48"W accessories will not fit across two 24"W panels.

Contact an OPTO designer to discuss your freestanding wall needs. We will ensure you receive a proper setup.

Many OPTO Wall Systems must be attached to a wall.
Most retail wall solutions offered by OPTO must be directly attached to a
wall or soffit. Wall systems requiring mounting include Perimeter Wall system, Post Wall system, Basics Wall system, and Ceiling/Floor Mounted Post Wall system.
Wall systems shown on this page represent some examples of Freestanding Wall solutions. You can customize any of these solutions to fit your space, match your style, and show your merchandise.